So, I’ve got family in the Upper Peninsula of Michigan. That’s the U.P. to the locals, which thankfully has zero to do with bodily functions.
A few weeks ago, they had major flooding. Some towns were underwater, roads were washed out, and bridges… some were fine, some were compromised, some needed their integrity checked, and some were just taken out completely.
Thankfully, nobody got hurt, but it got me thinking about bridges in our songs.
Because the same conditions up in the U.P. apply to bridges in our songs: some are fine, some are compromised, some need their integrity checked, and some get taken out.
Now, let’s say you sit down to write a song. You’ve decided on a verse-chorus-verse-chorus-bridge-chorus structure.
Sounds reasonable enough, right?
Hold up, palaroo. I’ve got a question.
Can we really know our song needs a bridge when we haven’t written a single word of it yet?
If you’ve mapped the whole thing out section by section and know exactly what you’re saying in each, that’s a different story.
But to strum a chord and decide, “I’m going to write a VCVCBC song.”
That’s risky. Because you don’t know yet if you even need that bridge.
You might think bridges are trendy. Lots of songs have them. Nobody wants to show up without one.
The thing is, you can absolutely tell when someone is locked in a bridge before the song has a chance to ask for one.
It’s like a party guest who showed up to the wrong house and is too polite to leave. Or too comfortable to be asked to do same.
It just sits there. A little out of place.
Now I’m not saying don’t write a bridge. I’m saying don’t write one just because it’s trendy, or because “everyone puts bridges in their songs.”
This can happen without consciously thinking about it.
But how do you tell when a bridge doesn’t belong?
The bridge is a verse lyric gussied up in different clothes.
One clue is when a section gets the bridge label slapped on it, but the lyric is really just a continuation or rehash of the verse.
Maybe it’s got a few different chords or a slightly different melody. But repeating the verse’s point with different words isn’t a bridge just because it was musically dressed up like one.
It’s like putting a cowboy hat on a golden retriever. Sure, it’s wearing a hat. That doesn’t make it a cowboy. Or even a cow dog.
You come up with a musical and melodic change where a bridge should go, but you’re not sure what to write lyrically. So the words wind up as a politely dressed extension of the verse story.
That’s not a good enough reason to have a lyric bridge. It’ll generally weaken the song.
Either develop a genuinely different lyrical perspective or make it an instrumental bridge. Both are honest options.
There’s another common mistake.
New lyric idea, but same old music.
This is the flip side of what we just talked about.
You’ve got a fresh lyric perspective, but you’re running a similar groove, melody, or progression over it. That makes the lyric feel rolled over, like a pancake squirrel on the songwriting highway.
It never had a chance.
You did a great job on the lyric. Now it’s time to give the bridge its due and do something different musically and melodically to match.
For a bridge to land with a new lyric perspective, the music should go somewhere new, too.
You should be able to identify each section of a song by the music alone. No lyrics needed. If you can’t? Time to do a little work there.
If you don’t change the music enough, the bridge just drifts by like an oddly dressed verse, and you’ve missed a real shot at making a new point or catapulting that final chorus.
And then there’s this one…
A bridge is just another excuse to hear the chorus one more time.
Ever heard that?
There’s some half-truth to it. A little separation between the two final choruses is a welcome break. That part’s true.
But that alone isn’t a good enough reason to slide one into your song. If all you want is another chorus, just do a half chorus with a breakdown, or just repeat the chorus, period.
Save yourself the architectural headache.
Sometimes these bridge attempts are just one or two lines shoved in there looking lost.
That doesn’t mean a two-line bridge can’t work. It just has to earn its spot, same as everything else in your song. No freeloaders.
A great bridge can set up that final chorus so it hits even harder than it did the first time.
Write a lyric that turns the final chorus on its head, or gives it a whole new meaning the listener hadn’t considered until that moment.
What do you do if your bridge isn’t quite cutting it?
See if one of these tools helps.
1. Ask questions.
This works well when your verses make statements. Say your verses are all about how you love someone, and the chorus backs it up with an “I’ll always love you forever” message.
Flip the bridge into questions, like this:
Do you love me like I do you?
Am I your forever too?
Am I the only one that’ll hold on for eternity?
Even if you don’t, does that make me a fool?
Now, the final chorus doesn’t just say she loves him forever. It says she loves him forever, even if she’s a fool for doing so, even if she doesn’t get that love back.
That puts a little catapult under the song that wasn’t there before. Just by asking opposing questions in the bridge.
The flip side: when your verses are full of questions, you can give the bridge a bold, definitive answer.
2. Go back in time or to the future.
If your song’s set in the present, stepping back in time or leaping forward naturally brings in details your verses won’t have covered.
Say your song is about two people who’ve been married a long time and are still very much in love.
If the verses are in the present with details like:
I saw it again in this morning’s paper
Another divorce decree
A casualty of love
The altar never expected to see
Then maybe a pre-chorus:
Then I turned my eyes and looked up
Saw you with your morning cup
And a chorus like:
After all these years
You’d think love would get cold
After all these years
I give thanks every day
Our love is like play
It never grows cold
After all these years
Now, the bridge could jump back in time for a deeper perspective:
Remember when we met?
With my broken down Chevy
That two-bit job and empty pockets
I was a joke
The kind that really isn’t funny
Forty years later and I still can’t see
Why you ever said yes to a guy like me
The contrast between then and now? That’s a bridge earning its keep.
3. Go closer or further away.
If your song is zoomed into your city with street names, local shops, and inside details, pull way back in the bridge.
Write from a wide-angle perspective.
Or say your verses describe someone you’re drawn to across the room. How they hold themselves, how they smile, how they walk with grace or swagger with confidence.
One technique here is to bring the focus closer in the bridge. If it’s a lady, it might go like this:
She came within breath mint distance
My palms began to sweat
She smelled like cedar and rain
Oh, the speckles in her eyes
And girlish freckles on her face
I wasn’t sure of my next step
Drawing the scene closer gives your song movement without moving anything other than the camera on your subject.
4. Change the dynamics.
Listeners expect the music to change between sections. But you can go a step further by changing the music’s dynamics.
In AABA song forms, it’s not uncommon to make the bridge a musical powerhouse.
In any song form, you could bring the dynamics way down. Maybe just guitar and vocal. Drum and vocal. Or just vocal.
Then let the final chorus come slamming back.
Sometimes the best thing you can do for a bridge is get out of your own way and take something away instead of piling more on.
5. Change the meter.
Your verse and chorus have their own meter, line length, and feel. Make the bridge noticeably different. Shorten the lines. Mess with the meter on purpose.
Say your chorus is:
When we’re feeling lost
We need time to breathe
It doesn’t always mean goodbye
Truth is…
We don’t know what love means
Or what’ll be the cost
When we’re feeling lost
A bridge with a much shorter line length and meter could be:
Gone
Poof gone
Not, “so-long”
She ain’t coming back
That alone can nudge the melody somewhere the verses wouldn’t go if it were written with longer lines.
6. Start lyrics on a different beat.
We get so focused on everything going into our song, we miss something hiding in plain sight. Starting all our song sections on beat one.
If your verse lyrics come in on beat one of measure one, that’s fine. But then try pushing your chorus lyric to beat two.
And if you do that, come in on your bridge on a different beat still.
If the bridge is relaxed, vulnerable, or questioning, try coming in slightly after any beat. That gives it a matching feel, almost like a hesitation.
If it’s high energy and powerful, jump the beat by half a beat for a sense of urgency and forward motion.
7. Change the vowel sounds.
Just like which beat you come in on, changing up the vowel sounds between sections helps differentiate them.
If you end your verse rhyming lines with words like grease, ease, needs, then change it up for the chorus.
Use words like grab, craft, stab.
And on the bridge, try sounds like you, fool, cruel.
This might sound trivial, but it helps set each song section apart, including the bridge.
See what we’re going for here?
We’re looking at all the elements that go into a song and mixing things up for the bridge.
You could even get adventurous and change the time signature, tempo, or key.
Now, all this is great, provided you actually need a bridge in the first place. Keep that in mind.
If it isn’t moving the song forward, you might not need one.
Pay attention to your gut. Does the song feel unfinished without a bridge? Sometimes it really does. Sometimes you’ll feel it in your bones before you even know why.
Trust that. Just don’t let habit, trends, or the ghost of every song you’ve ever heard make the decision for you.